etc/ssh

etc/ssh/ssh_config

@@ -0,0 +1,53 @@
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+Include /etc/ssh/ssh_config.d/*.conf
+
+Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   ForwardX11Trusted yes
+#   PasswordAuthentication yes
+#   HostbasedAuthentication no
+#   GSSAPIAuthentication no
+#   GSSAPIDelegateCredentials no
+#   GSSAPIKeyExchange no
+#   GSSAPITrustDNS no
+#   BatchMode no
+#   CheckHostIP no
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/id_rsa
+#   IdentityFile ~/.ssh/id_dsa
+#   IdentityFile ~/.ssh/id_ecdsa
+#   IdentityFile ~/.ssh/id_ed25519
+#   Port 22
+#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
+#   MACs hmac-md5,hmac-sha1,umac-64@openssh.com
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   VisualHostKey no
+#   ProxyCommand ssh -q -W %h:%p gateway.example.com
+#   RekeyLimit 1G 1h
+#   UserKnownHostsFile ~/.ssh/known_hosts.d/%k
+    SendEnv LANG LC_* COLORTERM NO_COLOR
+    HashKnownHosts yes
+    GSSAPIAuthentication yes

etc/ssh/ssh_config.d/20-systemd-ssh-proxy.conf

@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: LGPL-2.1-or-later
+#
+# Allow connecting to the local host directly via ".host"
+Host .host machine/.host
+        ProxyCommand /usr/lib/systemd/systemd-ssh-proxy unix/run/ssh-unix-local/socket %p
+        ProxyUseFdpass yes
+        CheckHostIP no
+
+# Make sure unix/* and vsock/* can be used to connect to AF_UNIX and AF_VSOCK paths.
+# Make sure machine/* can be used to connect to local machines registered in machined.
+#
+Host unix/* vsock/* machine/*
+        ProxyCommand /usr/lib/systemd/systemd-ssh-proxy %h %p
+        ProxyUseFdpass yes
+        CheckHostIP no
+
+        # Disable all kinds of host identity checks, since these addresses are generally ephemeral.
+        StrictHostKeyChecking no
+        UserKnownHostsFile /dev/null

etc/ssh/sshd_config

@@ -0,0 +1,126 @@
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/usr/bin:/bin:/usr/games
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Include /etc/ssh/sshd_config.d/*.conf
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# Expect .ssh/authorized_keys2 to be disregarded by default in future.
+#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to "no" here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to "yes" to enable keyboard-interactive authentication.  Depending on
+# the system's configuration, this may involve passwords, challenge-response,
+# one-time passwords or some combination of these and other methods.
+# Beware issues with some PAM modules and threads.
+KbdInteractiveAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the KbdInteractiveAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via KbdInteractiveAuthentication may bypass
+# the setting of "PermitRootLogin prohibit-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and KbdInteractiveAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale and color environment variables
+AcceptEnv LANG LC_* COLORTERM NO_COLOR
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
+
+Include /etc/ssh/sshd_config.d/*.conf

etc/ssh/sshd_config.d/sftp.conf

@@ -0,0 +1,11 @@
+Subsystem sftp internal-sftp
+
+Match Group sftp
+    PasswordAuthentication yes
+    PubkeyAuthentication yes
+    ForceCommand internal-sftp -u 0027
+    ChrootDirectory %h
+    PermitTunnel no
+    AllowAgentForwarding no
+    AllowTcpForwarding no
+    X11Forwarding no